Porcelain, ceramic, and shower tile
Compare tile flooring in Albany, NY at Albany Carpet Warehouse on Wolf Road. We help you choose porcelain or ceramic tile, slip resistance, grout color, and layout details for showers, backsplashes, entries, and busy rooms.
Why Choose Porcelain & Ceramic Tile?
Best Uses
Tile flooring is a strong Albany-area choice where water, heat, and easy cleanup matter. Custom showers, kitchen backsplashes, high-traffic mudrooms, laundry rooms, and entries benefit most from premium porcelain or ceramic.
If you want a warmer feel in a bedroom or main living area, the showroom may point you toward carpet, hardwood, LVP, or laminate instead.
Showroom Selection
Planning Details
Tile decisions get easier when you can compare samples against the actual room at a local flooring store. Bring photos, rough measurements, cabinet or counter colors, and notes about water, traffic, and cleaning expectations.
Google Reviews
Next Steps
Show the room, cabinets, counters, paint colors, and any problem areas.
Look at tile size, finish, grout color, trim, and layout direction in person.
Talk through measurements, transitions, prep work, and installer next steps.
Common Questions
Learn the differences between porcelain and ceramic tile, grout selections, and sealant requirements.
Porcelain tile is fired at a higher temperature, making it denser, less porous, and highly resistant to scratching, chipping, and moisture. We recommend porcelain for floors, entryways, and outdoor use because of its durability. Ceramic tile is slightly softer, easier to cut, and is highly suitable for wall applications, backsplashes, and light-traffic residential flooring.
Rectified tiles (with precision-ground edges) allow for narrow grout joints (1/16-inch), creating a modern, seamless look. Non-rectified tiles require wider joints (1/8-inch to 3/16-inch). For grout color, choosing a tone that matches the tile creates a clean, continuous look, while a contrasting grout highlights the tile pattern. We recommend using high-quality stain-resistant grouts like MAPEI Ultracolor Plus.
Glazed porcelain and ceramic tiles do not require sealing. However, natural stone tiles (like marble, slate, or travertine) and traditional cement-based grouts must be sealed to protect against staining and moisture penetration. Pre-mixed or high-performance grouts (such as epoxy grouts) do not require sealing.
Slip resistance is measured by the Dynamic Coefficient of Friction (DCOF). For wet areas like bathroom floors and custom showers, we recommend tiles with a DCOF rating of 0.42 or higher to prevent slipping when wet.
Related flooring pages
Call or stop by the Wolf Road showroom to compare tile samples and talk through the room.
